Car Ghost Immobiliser
Ghost Immobiliser A sophisticated system that stops your vehicle from starting without a unique code input through existing buttons. The device is inaccessible to thieves and runs quietly.
It can help to deter hotwiring, as well as newer methods like relay thefts. car stolen with ghost immobiliser may also reduce your insurance premium.
No Radio Frequencies
A ghost immobiliser differs from a standard one in that it does not transmit radio frequency, which makes it impossible for thieves to get around the device using a cheap cloning tool. Ghost immobilisers stop your car from starting when the burglar has copied or stolen your key.
A ghost immobiliser can also be used to prevent relay attacks. The signal from your key fob is amplified in order to fool the system into allowing your car to begin. The Ghost will recognise this and will not allow you to start the vehicle until you enter the PIN code. This is a great way to stop thieves who have access to affordable and easy-to-use equipment to copy or steal your vehicle.
The Ghost can also be installed in a discreet manner (without causing any damage to your vehicle) and will only function after the correct pin sequence has been entered. The Ghost is only accessible to the owner, and nobody else will be able to use your vehicle unless they have your pin code. Certain systems allow the owner to set up a valet mode or service mode, which allows them to temporarily let another person use their vehicle without revealing their pin code. This helps protect them from opportunistic thefts.
Additionally, it is user-friendly and simple to deactivate and disarm, the Ghost can also be connected with a car tracker to make it possible to track your car. ghost immobiliser tracker will offer discounts on your vehicle insurance if it has a Ghost installed which is fantastic news for the security of your vehicle and its contents.
Although the Ghost immobiliser isn't Thatcham approved, it is an aftermarket item that has been tested independently and proved to be effective. Ask the seller of a secondhand vehicle with the Ghost installed to transfer it to your car. This will make your new car more secure than in the case that the previous owner hadn't transferred it.
No Circuit Cuts
The absence of circuit cuts means that when the vehicle is stolen, thieves will not be able to begin it. The thieves will need to know which buttons are used to unlock the vehicle, and they will not be able to accomplish this without knowing these sequences. This will further deter them and make sure that they don't attempt to steal the car in the first place as they might not be able to escape with the car.
If you have a GPS tracking device installed it, the Ghost can function as an anti-theft device. It can send a signal to trigger a siren alarm to notify the tracker of a theft attempt. This feature can be turned on at any time through your online dashboard.
When you connect your Ghost to the CAN data network, it will identify the vehicle and its owner by using the unique pin code programmed during installation. This allows the device to communicate directly with the ECU of your vehicle and to stop the engine. This means that only the vehicle owner or a person with the PIN number, is able to start the engine.
The pin code is difficult to be guessed by potential thieves because it is constructed by using buttons that are easily accessible by the driver, for example stereo mute and cruise control. Your engineer will also supply you with an emergency Pin Code override card which is similar to a scratch-off lottery ticket and simply needs to be scratched off to reveal the code and the instructions.
Your Ghost is not detectable by these methods since it doesn't use radio frequencies or circuit breaks. It is therefore unaffected by the modern techniques used by organised gangs who are experts in the use of RF scanning technology as well as code-grabbing. It's also a lifetime product, and can easily be removed from your car when you sell it, meaning that you will not lose any of the protection that you have invested in.
No Key Fobs
With rising vehicle theft in the UK It is imperative to take proactive measures needed to protect beloved vehicles from thieves who are opportunistic. The Autowatch Ghost Immobiliser is an innovative device that provides an extremely robust defense against key cloning attacks, hacking and attacks on signals relay. ghost ii immobiliser is a discreet and highly effective security system for cars that is easy to install on a broad range of automobiles.
In contrast to traditional systems that rely on key fobs the Ghost immobiliser does not have LED indicators and operates through the signal relay. It is not affected by signal interference and is not able to be activated by stolen or compromised remotes. It's also tamperproof and has no external wiring making it difficult to take off.
It safeguards you from key-long hacking, key theft and key-long by preventing your engine from starting until a unique PIN has been entered. This is done by using buttons already present on the vehicle, such as those on the steering wheel or doors.
This is the only method you have to start your engine and it will only work when you have entered the correct pin code. This makes it very difficult for thieves to steal your vehicle and is easy to use. Alternatively, if you're worried about not remembering the pin code, the installer will provide you with an emergency driver fob that lets you use your car in the same way as you normally would.
The absence of key fobs or LED indicators also means that the Ghost immobiliser is not detectable by the diagnostic equipment or RF scanners employed by thieves to detect the presence of an electronic system. This method of installation is more stealthy and enhances the security of the system, and permits it to be put in a place that is difficult to steal.
Ghost immobilisers are a low-cost and highly effective deterrent to theft. They also increase the value of your car. They are also accepted by some insurance providers and may result in reduced costs.
No Damage
If your car is fitted with a ghost ignition system, you will have peace of peace of mind knowing that your vehicle is protected against hacking, cloning and key-fob theft and other common methods of theft. This is particularly crucial if you've invested lots of money and time customizing your vehicle or have an expensive or rare model. Ghost immobilisers operate in a silent manner leaving no evidence of instillation, and does not require any new parts to be put in.
The system allows you to create an individual pin code that needs to be entered in order for the engine to start. It is activated by buttons on your steering wheel or console, or on the door panels. You can alter the sequence at anytime. This means that even if a person has your pin number, they cannot start your vehicle. The device can also be deactivated in the service valet mode which allows you to take your car away for cleaning or servicing without it being activated.
The burglar won't be in a position to start your vehicle if it is cloned and will thus be caught. The system also alerts you to any tampering with the wiring system of your vehicle for example, cutting or signal interception and can send this information to your smartphone and allow you to ensure that the security of your car is always in good order.
However, there could come a time that you want to remove or disable the Ghost Immobiliser for maintenance or for resale. In this situation you'll need to be extremely careful not to damage your vehicle's wiring. It is strongly recommended that you wear protective gloves during the procedure, and use a flashlight to illuminate the dark areas of your vehicle in which the immobiliser could be. It is also recommended to refer to any installation instructions or user guides you might have available in order to locate the exact location of the device.
After the immobiliser has been disconnected from your vehicle's wiring system, you can reconnect the battery to your car and then test to ensure that it is working properly and that all electrical components are working according to their intended purpose. You will need to use soldering or electrical tape to insulate any wires that have been cut. Check to see if any exposed wires are present, and that any dangling wires are secured by zip ties or other suitable means. Also, schedule a car check-up with a professional to ensure that the removal process didn't cause damage to other systems within your vehicle.